Polished Stainless Designer ABS Upper DOT Brake Line 30" 90° 7/16"

• This ABS Designer Upper Brake Line is manufactured with an enhanced construction designed to be compatible with Harley-Davidson ABS requirements for stock and alternative length brake lines.
• This ABS Upper DOT Brake Line is also used for the Dual Disc Dyna Fat Bob and the Low Rider.
• Three upper brake line banjo angles, 90º, 35º and 180º ensures proper routing.
• The Single Disc Lower ABS banjo tube is supplied with the Single ABS Designer Lower Assembly, but can also be purchased separately if you don't wish to purchase the Designer Lower Assembly for your year and make of bike.  You can find the adapter in the ABS Single Disc Designer Upper Assemblies.  You will be required to have both the ABS upper brake line and the ABS adapter for any handlebar changes.
• Measuring instructions for your upper length is shown to you below.

Sizing Your Magnum Single Disc ABS Upper Brake Line:

To determine the required length of your new brake line, measure from the point at which the soft line enters the crimp collar and follow the brake line routing up to your master cylinder.  Magnum Shielding brake lines are designed to follow the same routing path as OEM lines.